Apollo 36" Stepped Putter

Apollo 36" Stepped Putter Reviews

More Picture

Standard length (36") straight putter shaft. Stepped steel pattern. Our best value!

Click here for more information on Apollo Golf Shafts.

Go tO Store Now !!

More Products

More Reviews

Project X Project X Flighted .355 Individual Iron( FLEX: 6.5, LENGTH:N/A, COLOR:N/A, HEAD:4 )

Project X Project X Flighted .355 Individual Iron( FLEX: 6.5, LENGTH:N/A, COLOR:N/A, HEAD:4 ) Reviews

More Picture

Project X Project X Flighted .355 Individual Iron( FLEX: 6.5, LENGTH:N/A, COLOR:N/A, HEAD:4 ) Feature

• FLEX: 6.5, LENGTH:N/A, COLOR:N/A, HEAD:4

Rifle Project X Flighted .355 Individual Iron Shaft In addition to the technology that made Rifle Project X a favorite among the worlds best players, this Rifle Project X Flighted Iron Shaft features an exaggerated change in kick point within the club set to manipulate ball flight. Long irons provide a lower kick point for higher ball flight, easier launch and greater distance, while the Project X Flighted short irons have a higher kick point for a lower trajectory, greater accuracy and control. Shaft Lengths: 1 Iron - 42 2 Iron - 41.5 3 Iron - 41 4 Iron - 40.5 5 Iron - 40 6 Iron - 39.5 7 Iron - 39 8 Iron - 38.5 9 Iron - 38 Wedge - 37.5 Flex Equals: 4.5 = Regular 5.0 = Regular + 5.5 = Stiff 6.0 = Stiff + 6.5 = Extra Stiff 7.0 = Extra Stiff +

Go tO Store Now !!

More Products

More Reviews

Project X Project X Individual Iron Shaft( FLEX: 6.0, LENGTH:N/A, COLOR:N/A, HEAD:1 )

Project X Project X Individual Iron Shaft( FLEX: 6.0, LENGTH:N/A, COLOR:N/A, HEAD:1 ) Reviews

More Picture

Project X Project X Individual Iron Shaft( FLEX: 6.0, LENGTH:N/A, COLOR:N/A, HEAD:1 ) Feature

• FLEX: 6.0, LENGTH:N/A, COLOR:N/A, HEAD:1

Rifle Project X Individual Iron Shaft The complex Rifle Project X Iron Shaft was in development for more than two years, and represents the most advanced steel shaft technology available today. Each shaft in a set has a different, dedicated constant taper per inch, transferring more energy to the clubhead. The result is a stepless shaft and a ball that rises faster and then flattens out for a more penetrating trajectory. Bend Points: Mid/High. Step Pattern:Stepless Flex Equals: 4.5 = Regular 5.0 = Regular + 5.5 = Stiff 6.0 = Stiff + 6.5 = Extra Stiff 7.0 = Extra Stiff +

Go tO Store Now !!

More Products

More Reviews

Aldila NVS 65 Graphite - Wood S

Aldila NVS 65 Graphite - Wood S Reviews

More Picture

The Aldila NVS features the same unmatched performance and incredible feel of the original NV, with a higher launch. While the tip-stiff, low launch shaft, the NVS features a more responsive tip for those seeking a higher ball fight.

To find out more about Aldila shafts go to the Aldila Product Detail page.

Go tO Store Now !!

More Products

More Reviews

Project X Project X Flighted .355 Individual Iron( FLEX: 5.0, LENGTH:N/A, COLOR:N/A, HEAD:8 )

Project X Project X Flighted .355 Individual Iron( FLEX: 5.0, LENGTH:N/A, COLOR:N/A, HEAD:8 ) Reviews

More Picture

Project X Project X Flighted .355 Individual Iron( FLEX: 5.0, LENGTH:N/A, COLOR:N/A, HEAD:8 ) Feature

• FLEX: 5.0, LENGTH:N/A, COLOR:N/A, HEAD:8

Rifle Project X Flighted .355 Individual Iron Shaft In addition to the technology that made Rifle Project X a favorite among the worlds best players, this Rifle Project X Flighted Iron Shaft features an exaggerated change in kick point within the club set to manipulate ball flight. Long irons provide a lower kick point for higher ball flight, easier launch and greater distance, while the Project X Flighted short irons have a higher kick point for a lower trajectory, greater accuracy and control. Shaft Lengths: 1 Iron - 42 2 Iron - 41.5 3 Iron - 41 4 Iron - 40.5 5 Iron - 40 6 Iron - 39.5 7 Iron - 39 8 Iron - 38.5 9 Iron - 38 Wedge - 37.5 Flex Equals: 4.5 = Regular 5.0 = Regular + 5.5 = Stiff 6.0 = Stiff + 6.5 = Extra Stiff 7.0 = Extra Stiff +

Go tO Store Now !!

More Products

More Reviews

Project X Project X Flighted Individual Irons

Project X Project X Flighted Individual Irons Reviews

More Picture

Rifle Project X Flighted Individual Iron Shaft In addition to the technology that made Rifle Project X a favorite among the worlds best players, the all-new Rifle Project X Flighted Iron Shafts feature an exaggerated change in kick point within the club set to manipulate ball flight. Long irons provide a lower kick point for higher ball flight, easier launch and greater distance, while the Project X Flighted short irons have a higher kick point for a lower trajectory, greater accuracy and control. Shaft Lengths: 1 Iron - 42 2 Iron - 41.5 3 Iron - 41 4 Iron - 40.5 5 Iron - 40 6 Iron - 39.5 7 Iron - 39 8 Iron - 38.5 9 Iron - 38 Wedge - 37.5 Flex Equals: 4.5 = Regular 5.0 = Regular + 5.5 = Stiff 6.0 = Stiff + 6.5 = Extra Stiff 7.0 = Extra Stiff +

Go tO Store Now !!

More Products

More Reviews

Mitsubishi Javaln-FX M6 Wood Shaft( FLEX: Regular, LENGTH:N/A, COLOR:N/A, HEAD:N/A )

Mitsubishi Javaln-FX M6 Wood Shaft( FLEX: Regular, LENGTH:N/A, COLOR:N/A, HEAD:N/A ) Reviews

More Picture

Mitsubishi Javaln-FX M6 Wood Shaft( FLEX: Regular, LENGTH:N/A, COLOR:N/A, HEAD:N/A ) Feature

• FLEX: Regular, LENGTH:N/A, COLOR:N/A, HEAD:N/A

Mitsubishi Javaln-FX M6 Wood Shaft The Mitsubishi Javaln-FX M6 Wood Shaft utilizes a specialized carbon fiber in the tip section called TRH50, designed internally by Mitsubishi Rayon engineers. This unique-to-Mitsubishi Rayon fiber has higher elasticity characteristics than similar fibers from other companies allowing Mitsubishi Rayon to deliver a more responsive, tip-stiff profile balanced by a softer butt section.

Go tO Store Now !!

More Products

More Reviews

Apollo Standard Stepless Steel - Wood A/L

Apollo Standard Stepless Steel - Wood A/L Reviews

More Picture

The Apollo Standard Stepless Steel offers a high end look at value pricing.

Click here for more information on the Apollo Golf Shafts.

Go tO Store Now !!

More Products

More Reviews

Harrison Shotmaker Accuracy Boosting Shaft Insert Kit - "G" (100-130 mph swing speed)

Harrison Shotmaker Accuracy Boosting Shaft Insert Kit - "G" (100-130 mph swing speed) Reviews

More Picture

Harrison Shotmaker Accuracy Boosting Shaft Insert Kit - "G" (100-130 mph swing speed) Feature

• Kit Includes: an insert, a telescoping insert tool and a grip lock.
• For more you can get the grip cutting tool. "CALL" IF YOU WANT THE GRIP CUTTING TOOL.

The Shotmaker is the first USGA rules conforming accuracy boosting shaft insert of its kind. It is a removable insert that is made with ultra-thin-ply graphite (UTP). The most vulnerable section of a golf shaft is its tip section. Upon impacting the golf ball, the shaft and particularly the tip section vibrates violently. Some shafts may even bend into an S shape around the kick point. The Shotmaker insert significantly stabilized the tip section of the shaft, resulting in greater accuracy. The insert prevents excessive vibration and deformation and hence improve accuracy up to 40%. The Shotmaker is about 12" long and weighs only 4 grams. This is a package that includes an insert, a telescoping insert tool, and a grip lock.

Go tO Store Now !!

More Products

More Reviews

UST Mamiya Frequency Filtered Putter Shaft Straight .370 Tip

UST Mamiya Frequency Filtered Putter Shaft Straight .370 Tip Reviews

More Picture

UST Mamiya Frequency Filtered Putter Shaft Straight .370 Tip Feature

• Industry's first new putter technology in 70 years.
• Filters out unwanted vibrations.
• Improves player's feel of ball impact on the putter face.

The first true putter shaft technology in more than 70 years. The new Frequency FilteredTM putter shaft amplifies touch and feel. If you like to feel every putt, then you are about to feel real good. This radically new putter shaft design improves the ability of all players to perceive or feel where ball impact occurs on the face. This instantaneous feedback results in improved putting ability since the player learns to consistently stroke more putts on the sweet spot of the putter. Feel becomes clearer and so does the confidence to make solid contact to sink more putts. Filtering Diffuser in the mid-section filters out higher, unwanted vibrations. Therefore, only the true feeling of the ball impacting the putter face is released to the hands. Interlinked Carbon fiber in the butt-section creates a tremendous amount of hoop strength for a consistently solid feel in the hands. Steel tip-section makes the shaft a perfect fit for the hottest putter heads on the market. Frequency Filtered putter shafts are available in 7 different tip-bend configurations. Each model should be trimmed to length from the butt end only. The best way to make sure our shaft will fit your putter is to have that putter measured by a repair shop or personally if you have the equipment. You want to measure the Outside Diameter of the tip where the shaft goes into the hosel or over the hosel of the putter. Knowing what tip configuration and the Outside Diameter of your putter will help you find which Frequency Filtered Putter shaft you need. The dimensions to our putter shafts are listed below. NOTE: The flex shown on the image is for representation only. Actual flex will vary based on shaft selected.

Go tO Store Now !!

More Products

More Reviews

UST Mamiya Competition Series Iron Shaft R/S Flex .370 Tip

UST Mamiya Competition Series Iron Shaft R/S Flex .370 Tip Reviews

More Picture

UST Mamiya Competition Series Iron Shaft R/S Flex .370 Tip Feature

• Ultimate in club-building versatility
• Extremely rugged, yet lightweight
• Greater trimming options

Competition Series - available in a stylish color scheme, the lighter weight combo design of the Competition 65 Series provides the ultimate club building flexibility and helps maximize distance, while offering golfers the perfect fit.NOTE: The flex shown on the image is for representation only. Actual flex will vary based on shaft selected.

Go tO Store Now !!

More Products

More Reviews

Rifle Project X 6.0 Flighted 3-PW Steel Iron Shafts .355 Taper Tip -- Set of 8 shafts

Rifle Project X 6.0 Flighted 3-PW Steel Iron Shafts .355 Taper Tip -- Set of 8 shafts Reviews

More Picture

Rifle Project X 6.0 Flighted 3-PW Steel Iron Shafts .355 Taper Tip -- Set of 8 shafts Feature

• UNCUT RIFLE PROJECT X 6.0 FLIGHTED 4-SW Steel Iron Shafts
• Condition: Brand New. Never been used. Might have occasional scratches from sitting around.
• Flex: Stiff 6.0
• UNCUT Lengths: 37", 37.5", 38", 38.5", 39", 39.5", 40", 40.5"
• Tip Size: 0.355 Taper Tip

You are looking at 8 brand new Rifle Project X steel iron shafts. These shafts are un-cut and have never been played. They might have a few occasional scratches from sitting around. Each iron shaft retails in golf stores and major online retailers for +. A set of Project X shafts like this could run up to 0. Please take a look at the information below, and let us know if you have any questions.

Go tO Store Now !!

More Products

More Reviews

UST Mamiya Proforce AXIVCore Blue Hybrid Shaft X Flex .370 Tip

UST Mamiya Proforce AXIVCore Blue Hybrid Shaft X Flex .370 Tip Reviews

More Picture

UST Mamiya Proforce AXIVCore Blue Hybrid Shaft X Flex .370 Tip Feature

• AXIV material for stability and consistent shaft recovery.
• High modulus materials.
• High launch.

For the player seeking high launch for longer carry distance. Proforce AXIVCore Hybrid Blue 85 integrates a true weave - 4-axis material - within the inner walls of the butt section that provides stability, excellent feel and consistent shaft recovery. The Blue 85 Series' active tip section provides higher launch for longer carry distance. Available in taper tip upon request. NOTE: The flex shown on the image is for representation only. Actual flex will vary based on shaft selected.

Go tO Store Now !!

More Products

More Reviews

True Temper Dynamic Gold SuperLite Iron .355 Taper( FLEX: X-Stiff, LENGTH:37.5 Inches, COLOR:N/A, HEAD:N/A )

True Temper Dynamic Gold SuperLite Iron .355 Taper( FLEX: X-Stiff, LENGTH:37.5 Inches, COLOR:N/A, HEAD:N/A ) Reviews

More Picture

True Temper Dynamic Gold SuperLite Iron .355 Taper( FLEX: X-Stiff, LENGTH:37.5 Inches, COLOR:N/A, HEAD:N/A ) Feature

• FLEX: X-Stiff, LENGTH:37.5 Inches, COLOR:N/A, HEAD:N/A

True Temper Dynamic Gold SL Iron .355 Taper Shaft: Constructed from revolutionary S3 alloy, the Dynamic Gold SL Iron Shaft is super light, designed for low to mid handicap golfers seeking tour playability. Shaft weight is only 105 grams versus the standard steel weight of 128 grams. When trimmed, this shaft weighs below 100 grams.

Go tO Store Now !!

More Products

More Reviews

UST-Mamiya iRod Hybrid Graphite - Iron S

UST-Mamiya iRod Hybrid Graphite - Iron S Reviews

More Picture

iRod is reborn as an all-new, low-cost “transition” iron/hybrid series. Hybrid shafts are designed for longer 3 & 4 irons/hybrids.

To find out more about UST shafts go to the UST Product Detail page.

Go tO Store Now !!

More Products

More Reviews

AccuFLEX Assassin II 50" Remax Long Drive Golf Shaft

AccuFLEX Assassin II 50" Remax Long Drive Golf Shaft Reviews

More Picture

AccuFLEX Assassin II 50" Remax Long Drive Golf Shaft Feature

• Original Limited Edition AccuFLEX Assassin II 50 Inch Golf Shaft
• Winner at the ReMAX World Long Drive Championship
• .335 tip diameter, 50" length
• Flexes Available - Stiff, X, 2X, 3X and 4X

JUST EMAIL US YOUR SHAFT FLEX WITH PURCHASE

FLEXES IN STOCK: (S, X, 2X, 3X, or 4X)

AccuFLEX ASSASSIN LD 50" Long Drive - the latest in long drive shaft technology -- features a 50" standard length to target golfers looking for an explosive release of energy in a longer shaft. A2 graphite Tip Technology taken to the extreme for players who are continuously searching for maximum ball flight: with optimal launch angle. The ASSASSIN LD 50" Series is a balance of optimum weight and a unique flex profile that produces a feeling of total energy transfer at impact and an explosive release of energy that works for all player types. The ASSASSIN LD 50" has been referred to as the "longest Driving shaft in golf"

Length (in) 50.0"
Weight (g) (S) 74g, (X) 77g, (XX) 80g, (3X) 85g, (4X) 85g
Torque (degrees) (S) 3.4, (X) 3.0, (XX) 2.8, (3X) 2.8, (4X) 2.8Tip Diameter (in) 0.335
Parallel Tip Length (in) 3"
Butt Diameter (in) 0.600
Bend Point Mid ~ Mid-Hi

Go tO Store Now !!

More Products

More Reviews

Accuflex Vizion Ultralite 50" Long Drive Golf Shaft

Accuflex Vizion Ultralite 50" Long Drive Golf Shaft Reviews

More Picture

Accuflex Vizion Ultralite 50" Long Drive Golf Shaft Feature

• Ultralite 50" Remax World Long Drive Golf Shaft Technology
• Gain 30 yards in distance
• 3.4* torque, 60 grams, 50" length, brand new, long drive competition model
• You may choose shaft flex - A, R, S, X, XX, XXX flexes available
• Email us your shaft flex preference(s) with purchase

You may choose shaft flex - A, R, S, X, XX, XXX flexes available

Just email us your shaft flex preference(s) with purchase

Retails for 9.99

New AccuFLEX "VIZION 50" Ultralite 60g LD shaft

Finally, a 50" 60g ultralite LD shaft for all level of players seeking hi-bend-point accuracy. The VIZION 50" Ultralite 60g with some of the lowest torques/weight ratios in all of golf is ideal for maintaining a mid-launch boring trajectory with plenty of accuracy.

The shaft features a Mid-Hi Bend-Point for a Mid-Low Launch and a Low spin tight dispersion and penetrating ball flight.

The "VIZION 50" is the next generation LD shaft utilizing Nano Linear Technology. Taking this technology to the next level, "VIZION 50" is designed with reduced ply inserts and full length layers in order to create a better balance between torque and flex, resulting in more efficient shaft loading and a smoother bend profile.

The VIZION 50" features a constant taper design for a precise feel of more energy transfer to the ball for instant player feedback. The use of Ultra-High modulus, low resin materials improves feel and allows the shaft to maintain its shape and recover more consistently for ball flight accuracy. Tighter tolerances ensure the most consistent performing shaft in golf.

Go tO Store Now !!

More Products

More Reviews